Solar Structures for Bangladesh projects, made in India
What it takes to land solar structures on a Bangladesh site: the port they clear through, the standards a consultant will hold them to, and the paperwork that has to travel with them.
Getting solar structures into Bangladesh
Bangladesh is targeting 30 GW of solar by 2030 and imports most of the mounting structure it needs. Kolkata to Chittagong is a short haul, and that shows up directly in your landed cost rather than in a sales pitch. Freight is the easy part. BNBC compliance is what has to be evidenced document by document.
Port of entry
Chittagong Port (Chattogram)
Also cleared through Mongla Port, Payra Port.
Shipped FOB, CIF, CFR.
Standards that apply here
- BNBC (Bangladesh National Building Code)
- IEC 61386
- BS 4678
- ISO 9001:2015
- IS 875
- ASTM A123
- AS/NZS 1170
Every shipment travels with mill test certificates against the grade specified on your order.
Who buys this in Bangladesh
Garment & Textile (EPZ) · Power Plants & Energy · Solar Energy · Construction · Special Economic Zones · Telecommunications
Trade picture
64 cable tray shipments (Seair data). Bangladesh's rapid industrial growth, garment sector EPZ expansion, and the 2030 solar target (30GW) are driving cable management and solar structure imports from India.
Solar Panel Mounting Structures
Roll-formed and fabricated solar mounting structures in pre-galvanized and hot-dip galvanized steel: ground-mount tables, rooftop rail systems and tracker-ready frames, sized to site wind and snow loads with matched fasteners and clamps.
Bangladesh cities we ship solar structures to
Each of these covers local procurement context — the zones, the projects and the buyers in that city specifically.
Before you write the enquiry
The technical detail behind the decisions on this page.
- Buyer's Guide
Solar Mounting Structures India: Specification & Site Rework Guide
Solar mounting errors are most expensive at specification stage. Wind-load, corrosion and pile-design decisions that prevent site rework, covered.
- Export
India Metal Export HS Codes 2026: Cable Trays, Earthing & Busbars
The wrong HS code costs 5% in unnecessary import duty. Complete 2026 HS table for cable trays, earthing, busbars, gratings and solar structures from India.
- Export
India–UAE CEPA: Zero Duty on Cable Trays & Earthing. How to Claim
India–UAE CEPA removes 5% import duty on cable trays and earthing. The step-by-step process for claiming the Preferential COO zero-duty benefit.
- Technical Guide
Solar Farm Earthing: DC Fault Paths, Architecture & IEC 62446
DC string earthing in a utility-scale solar farm is separate from AC system earthing. IEC 62446-1, IS 3043 and inverter earthing architecture, covered.
Other lines going into Bangladesh
Solar Structures into Bangladesh — the questions that come up
Answered by the people who make the product, not a sales desk.
There's no verified leader here either. Solar structure manufacture is spread across several Indian hubs supplying both domestic utility-scale projects and export. What actually separates suppliers is verified wind and snow-load engineering, IS 875 design compliance and hot-dip galvanizing thickness, not capacity claims. Vajra International manufactures ground-mount and rooftop solar structures in Howrah to IS 875 and ASTM A123.
Steel solar mounting structures typically export under HS 73089090 (other structures and parts, iron/steel); aluminium rail and clamp components fall under HS 76169900 (other articles of aluminium). Confirm the exact subheading for your specific BOM with your customs broker. HS 7308 clears at 0% duty into the UAE under India–UAE CEPA with a valid Certificate of Origin.
Solar structures sit under HSN 7308/7616 and carry 18% GST domestically. Exports ship zero-rated, under an LUT with no IGST or with IGST paid and refunded. An overseas buyer's FOB or CIF price carries only their own country's import duty, not Indian GST.
Ground-mount fixed-tilt tables on pile or ramming foundations are the default for utility-scale and open-land solar farms. Rooftop systems, rail-and-clamp for pitched roofs, ballasted frames for flat roofs, suit commercial and industrial rooftop solar where land isn't available. The choice comes down to site type, not project size; a large C&I rooftop still needs a rooftop system, not ground-mount.
Yes, structures are designed to IS 875 Part 3 basic wind speed up to 50 m/s. Coastal projects (Tamil Nadu, Gujarat, Andhra) need extra anchor density and possibly stainless fasteners. Share the site wind zone and we'll size accordingly.
Send us the solar structures spec for your Bangladesh job.
Drawings, a BOQ line, or the standard you have been given. You will get back specification, finish, lead time and a landed price to Chittagong Port (Chattogram).
- MTC · COO · inspection reports
- ±0.01 mm precision · in-house QA
- FOB · CIF · CFR to all major ports