Cable Tray Accessories & Fittings
Importers in Eldoret

Cable tray fittings fall under HSN 7308 and carry 18% GST domestically, same as the tray itself. Exports go out zero-rated under an LUT, or with IGST paid and refunded. An overseas buyer's FOB or CIF price carries only their own country's import duty.

Plan for horizontal and vertical bends (45° and 90°), equal tees, crosses, width reducers, covers (snap or bolted), coupler or splice plates for run continuity, and cantilever or bracket supports, all in the same material and finish as the tray. Ordering tray without this full set, then air-freighting a second shipment of bends and tees later, is one of the most common and expensive procurement mistakes we see.

Standard radii are 300, 600 and 900 mm. The correct choice depends on the cable's minimum bend radius, itself a function of cable diameter and voltage class, not the tray width alone. Check your cable manufacturer's minimum bend radius specification and pick the tray bend radius that doesn't force a tighter bend than the cable allows.

Snap-on covers can lift in 130+ km/h wind events. For coastal Gujarat, Odisha, Tamil Nadu and the GCC summer khamsin season, specify screw-fixed or hold-down clip covers with stainless fasteners. We have hold-down clip drawings sized for cyclone wind loading on request.