Cable Trays
Importers in Al Shamal
Northern Qatar's infrastructure expansion, utilities, road projects, and coastal development require cable trays, earthing, and structural components. Cable Trays is one of the highest-volume categories shipped from India into Al Shamal. Vajra International is a direct manufacturer in Kolkata supplying ladder · perforated · raceway.
About Cable Trays
Vajra International is an ISO 9001:2015-certified cable tray manufacturer and exporter in Kolkata, India, producing ladder, perforated and raceway cable trays to IEC 61537 and IS 12352. Trays are roll-formed in-house in MS, GI, stainless steel and aluminium: pre-galvanized for indoor and dry duty, hot-dip galvanized to a minimum average 85 µm per ASTM A123 for outdoor and coastal exposure, or powder coated where colour-coding is specified. Shipped direct on FOB/CIF terms with the matched accessory and support range, mill test certificates and full export documentation.
Materials & Finishes
- Mild Steel (MS)
- Pre-Galvanized (GI)
- Stainless Steel (SS 304 / 316)
- Aluminium
- Hot-Dip Galvanized
- Pre-Galvanized (GI)
- Powder Coated
- Mill Finish (Al)
Cable Trays Manufactured by Vajra
Visual specifications for cable trays exported to Al Shamal. We manufacture standard and custom dimensions in our Howrah works.
Ladder Cable Tray
Export Grade · Vajra International
Perforated Cable Tray
Export Grade · Vajra International
Cable Raceway / Trunking
Export Grade · Vajra International
Channel Cable Tray
Export Grade · Vajra International
Who in Al Shamal imports cable trays from India
Companies and organisations active in Al Shamal that specifically procure cable trays from Indian manufacturers. Volumes shown are approximate annual totals across that buyer's full Indian-import mix, based on customs shipment intelligence. Vajra International is a direct ISO 9001:2015 manufacturer of cable trays, talk to us instead of a trader.
Need cable trays for a Al Shamal project?
Vajra International rolls, fabricates and exports cable trays from Kolkata, direct from manufacturer.
Al Shamal Stadium (FIFA legacy)
Sports Infra
Cable trays, supports
~400 tons/yr from India
Al Shamal Industrial Park
Industrial Zone
Cable trays, gratings
~200 tons/yr from India
Al Shamal Cement Aggregate
Building Materials
Cable trays, supports
~150 tons/yr from India
Buyer names compiled from public customs shipment records (Seair, Volza, ImportGenius), trade press and company disclosures. Volume figures are approximate, indicative annual ranges, not contractual. Inclusion in this list does not imply a supply relationship with Vajra International. If you are one of the listed organisations and prefer not to be referenced, contact us.
Cable Trays delivery points in Al Shamal
Consignments for Al Shamal clear through Hamad Port, Doha. These are the ports, free zones and industrial districts our Al Shamal consignments are consigned to — tell us which one applies and the quotation carries the right delivery terms and documentation from the start.
- Al Shamal Municipality Projects
Shipped FOB, CIF, CFR against QCS (Qatar Construction Specification) and IEC 61386, with mill test certificates for the grade on your order.
Sourcing cable trays into Al Shamal — what buyers ask
Specification, finish, documentation and terms, answered by the works in Howrah rather than a trading desk.
Cable tray nests. Ladder and perforated sections stack inside each other, so a 40 ft container holds roughly 1.5 to 1.8 km of standard 300 mm tray, less for wider or heavier-gauge profiles. That nesting keeps container utilisation high and per-metre freight low, a real cost edge over bulkier imported alternatives.
Coastal and offshore sites need hot-dip galvanizing to ASTM A123 (85 microns minimum), or stainless 316L in splash zones. For Gulf desert projects, where chlorides are low but sand abrades coatings, HDG without a top coat works well. For aggressive coastal petrochemical sites, a duplex system of HDG plus epoxy pushes corrosion life past 30 years.
Yes, where it's listed for the duty. NEC 392.60 and IEC 61537 both permit a metallic tray to act as an equipment grounding conductor, provided its cross-section meets the fault-current table and every joint keeps electrical continuity (galvanizing removed at bonding points, jumpers fitted across expansion joints). Confirm the tray is approved for EGC use before you rely on it for that path.
Plan for bends (horizontal and vertical), tees, crosses, reducers, covers, couplers or splice plates, and support brackets, all in the same material and finish as the tray. One mistake we see constantly: ordering tray without accessories, then air-freighting a second small shipment of bends and tees at a premium once the gap shows up on site. Count the full accessory list into your enquiry from the start.
On its own, a steel channel won't certify the cable as fire-survival, that depends on the cable construction. But mineral-insulated or fire-resistant cables routed on HDG channel trays remain code-compliant for life-safety circuits in commercial buildings, provided fixings are also fire-rated.
Buying cable trays for Qatar generally, not just Al Shamal?
Port of entry, the standards a Qatar consultant will hold you to, Incoterms and the full delivery map.
Other categories Al Shamal imports from India
Al Shamal's buyers source multiple categories from Indian manufacturers. Compare with the other high-volume imports below.
Need cable trays in Al Shamal? Talk to a manufacturer.
Vajra International is a direct manufacturer in Kolkata, not a middleman. Tell us specification, quantity and your preferred Incoterm. You'll get a structured quotation with MTC, COO and logistics already factored in.
- MTC · COO · inspection reports
- ±0.01 mm precision · in-house QA
- FOB · CIF · CFR to all major ports