Cable Trays
Importers in Dhaka
Bangladesh's capital and primary commercial hub. EPC contractors, power utilities (BPDB, DESA, DESCO), and construction firms procure cable management, earthing, and electrical products here. Cable Trays is one of the highest-volume categories shipped from India into Dhaka. Vajra International is a direct manufacturer in Kolkata supplying ladder · perforated · raceway.
About Cable Trays
Vajra International is an ISO 9001:2015-certified cable tray manufacturer and exporter in Kolkata, India, producing ladder, perforated and raceway cable trays to IEC 61537 and IS 12352. Trays are roll-formed in-house in MS, GI, stainless steel and aluminium: pre-galvanized for indoor and dry duty, hot-dip galvanized to a minimum average 85 µm per ASTM A123 for outdoor and coastal exposure, or powder coated where colour-coding is specified. Shipped direct on FOB/CIF terms with the matched accessory and support range, mill test certificates and full export documentation.
Materials & Finishes
- Mild Steel (MS)
- Pre-Galvanized (GI)
- Stainless Steel (SS 304 / 316)
- Aluminium
- Hot-Dip Galvanized
- Pre-Galvanized (GI)
- Powder Coated
- Mill Finish (Al)
Cable Trays Manufactured by Vajra
Visual specifications for cable trays exported to Dhaka. We manufacture standard and custom dimensions in our Howrah works.
Ladder Cable Tray
Export Grade · Vajra International
Perforated Cable Tray
Export Grade · Vajra International
Cable Raceway / Trunking
Export Grade · Vajra International
Channel Cable Tray
Export Grade · Vajra International
Who in Dhaka imports cable trays from India
Companies and organisations active in Dhaka that specifically procure cable trays from Indian manufacturers. Volumes shown are approximate annual totals across that buyer's full Indian-import mix, based on customs shipment intelligence. Vajra International is a direct ISO 9001:2015 manufacturer of cable trays, talk to us instead of a trader.
Need cable trays for a Dhaka project?
Vajra International rolls, fabricates and exports cable trays from Kolkata, direct from manufacturer.
Robi Axiata
Telecom
Earthing systems, cable trays
~700 tons/yr from India
Dhaka Metro Rail (DMTCL)
Transit
Cable trays, earthing strips
~1,500 tons/yr from India
Bashundhara Group
Conglomerate
Cable trays, supports
~1,000 tons/yr from India
Hazrat Shahjalal International Airport
Airport
Cable trays, earthing
~700 tons/yr from India
Beximco Group
Conglomerate
Cable trays, supports
~800 tons/yr from India
Padma Multipurpose Bridge Authority
Bridge / Infra
Cable trays, earthing strips
~900 tons/yr from India
Buyer names compiled from public customs shipment records (Seair, Volza, ImportGenius), trade press and company disclosures. Volume figures are approximate, indicative annual ranges, not contractual. Inclusion in this list does not imply a supply relationship with Vajra International. If you are one of the listed organisations and prefer not to be referenced, contact us.
Cable Trays delivery points in Dhaka
Consignments for Dhaka clear through Chittagong Port (Chattogram). These are the ports, free zones and industrial districts our Dhaka consignments are consigned to — tell us which one applies and the quotation carries the right delivery terms and documentation from the start.
- Dhaka Export Processing Zone
- Tejgaon Industrial Area
- Hazaribagh Industrial
Shipped FOB, CIF, CFR against BNBC (Bangladesh National Building Code) and IEC 61386, with mill test certificates for the grade on your order.
Sourcing cable trays into Dhaka — what buyers ask
Specification, finish, documentation and terms, answered by the works in Howrah rather than a trading desk.
Common gauges are 1.2, 1.6, 2.0 and 2.5 mm. 1.2 mm suits light control cabling on short spans, 1.6 mm is the general-purpose default, and 2.0 to 2.5 mm is for heavy power runs, wide trays or long support spans. Rather than order by gauge alone, give the cable load per metre and support spacing, and let the manufacturer confirm the thickness.
Add the cross-sectional area of all cables, then keep the fill ratio below about 40% of the tray's internal area so heat can dissipate, per IEC 61537 practice. Don't stack a single layer of power cable; for control cable, 40% fill is acceptable. Share the cable schedule and we can confirm tray width, depth and load class before fabrication.
A credible Indian manufacturer ships a commercial invoice, packing list, Mill Test Certificate (MTC) tracing the steel to its heat, a galvanizing certificate stating zinc thickness, and a Certificate of Origin (COO) for duty relief. Third-party inspection reports from SGS, TÜV or Bureau Veritas are added where the buyer or the standard requires them.
There is no fixed minimum for international supply. Partial containers get consolidated with accessories and documentation into one shipment routinely. Most first-time orders are sized to fill a 20 ft or 40 ft container simply because that's the efficient freight unit. Tell us the destination port and Incoterm and we'll confirm what order size makes sense.
Only with internal dividers (or compartmented trunking). IEC 60364 requires separation between low-voltage power and ELV signal/data cabling. We supply dividers in matched finish, height-stepped to suit the largest cable, so the installation passes audit cleanly.
Buying cable trays for Bangladesh generally, not just Dhaka?
Port of entry, the standards a Bangladesh consultant will hold you to, Incoterms and the full delivery map.
Other categories Dhaka imports from India
Dhaka's buyers source multiple categories from Indian manufacturers. Compare with the other high-volume imports below.
Need cable trays in Dhaka? Talk to a manufacturer.
Vajra International is a direct manufacturer in Kolkata, not a middleman. Tell us specification, quantity and your preferred Incoterm. You'll get a structured quotation with MTC, COO and logistics already factored in.
- MTC · COO · inspection reports
- ±0.01 mm precision · in-house QA
- FOB · CIF · CFR to all major ports