Cable Tray Accessories & Fittings
Importers in Dhaka
Bangladesh's capital and primary commercial hub. EPC contractors, power utilities (BPDB, DESA, DESCO), and construction firms procure cable management, earthing, and electrical products here. Cable Tray Accessories & Fittings is one of the highest-volume categories shipped from India into Dhaka. Vajra International is a direct manufacturer in Kolkata supplying bends · tees · covers · supports.
About Cable Tray Accessories & Fittings
A cable-management system is only as good as its fittings. Vajra supplies the full accessory range matched in material, thickness and finish to the parent tray, so installed runs keep their corrosion rating through every direction change.
Materials & Finishes
- Mild Steel (MS)
- Pre-Galvanized (GI)
- Stainless Steel (SS 304 / 316)
- Aluminium
- Hot-Dip Galvanized
- Pre-Galvanized (GI)
- Powder Coated
Cable Tray Accessories & Fittings Manufactured by Vajra
Visual specifications for cable tray accessories & fittings exported to Dhaka. We manufacture standard and custom dimensions in our Howrah works.
Bends, Tees & Reducers
Export Grade · Vajra International
Covers, Couplers & Supports
Export Grade · Vajra International
Who in Dhaka imports cable tray accessories & fittings from India
Companies and organisations active in Dhaka that specifically procure cable tray accessories & fittings from Indian manufacturers. Volumes shown are approximate annual totals across that buyer's full Indian-import mix, based on customs shipment intelligence. Vajra International is a direct ISO 9001:2015 manufacturer of cable tray accessories & fittings, talk to us instead of a trader.
Need cable tray accessories & fittings for a Dhaka project?
Vajra International rolls, fabricates and exports cable tray accessories & fittings from Kolkata, direct from manufacturer.
Bashundhara Group
Conglomerate
Cable trays, supports
~1,000 tons/yr from India
BSRM Steels
Steel
Steel supports, gratings
~1,400 tons/yr from India
Square Group
Pharma / FMCG
Cable management, supports
~500 tons/yr from India
Beximco Group
Conglomerate
Cable trays, supports
~800 tons/yr from India
Buyer names compiled from public customs shipment records (Seair, Volza, ImportGenius), trade press and company disclosures. Volume figures are approximate, indicative annual ranges, not contractual. Inclusion in this list does not imply a supply relationship with Vajra International. If you are one of the listed organisations and prefer not to be referenced, contact us.
Tray Accessories delivery points in Dhaka
Consignments for Dhaka clear through Chittagong Port (Chattogram). These are the ports, free zones and industrial districts our Dhaka consignments are consigned to — tell us which one applies and the quotation carries the right delivery terms and documentation from the start.
- Dhaka Export Processing Zone
- Tejgaon Industrial Area
- Hazaribagh Industrial
Shipped FOB, CIF, CFR against BNBC (Bangladesh National Building Code) and IEC 61386, with mill test certificates for the grade on your order.
Sourcing tray accessories into Dhaka — what buyers ask
Specification, finish, documentation and terms, answered by the works in Howrah rather than a trading desk.
Yes, where tray and accessories are manufactured and galvanized together by one supplier. A single Mill Test Certificate and galvanizing certificate covering the full consignment is standard practice there, and it simplifies your site documentation compared with reconciling separate certificates from a tray supplier and an accessories trader.
Yes, strongly recommended. Bends, tees, reducers and covers need to match the parent tray's profile, thickness and finish for the run to keep a consistent corrosion rating and load path through every direction change. Mixed-source accessories are a common cause of finish mismatch, HDG tray paired with pre-galv fittings for instance, and that shows up as premature rust right at the joints.
Bends, tees, reducers, covers and couplers typically export under HS 73089090 (other structures and parts of structures, iron/steel), the same code as the parent tray. Confirm with your customs broker if any specific fitting falls under a different subheading based on its exact configuration.
Cable tray fittings fall under HSN 7308 and carry 18% GST domestically, same as the tray itself. Exports go out zero-rated under an LUT, or with IGST paid and refunded. An overseas buyer's FOB or CIF price carries only their own country's import duty.
Both are available. Concentric reducers keep the centreline aligned (used when the cable bundle reduces evenly); eccentric reducers align the top or bottom surface (used when the tray transitions to a different deck level). Specify which on the layout drawing.
Buying tray accessories for Bangladesh generally, not just Dhaka?
Port of entry, the standards a Bangladesh consultant will hold you to, Incoterms and the full delivery map.
Other categories Dhaka imports from India
Dhaka's buyers source multiple categories from Indian manufacturers. Compare with the other high-volume imports below.
Need cable tray accessories & fittings in Dhaka? Talk to a manufacturer.
Vajra International is a direct manufacturer in Kolkata, not a middleman. Tell us specification, quantity and your preferred Incoterm. You'll get a structured quotation with MTC, COO and logistics already factored in.
- MTC · COO · inspection reports
- ±0.01 mm precision · in-house QA
- FOB · CIF · CFR to all major ports