Fabricated Steel Supports & Frames
Importers in Sharjah
Sharjah industrial zones house hundreds of manufacturing and contracting firms sourcing cable management products directly from Indian exporters. Fabricated Steel Supports & Frames is one of the highest-volume categories shipped from India into Sharjah. Vajra International is a direct manufacturer in Kolkata supplying cantilevers · frames · skids.
About Fabricated Steel Supports & Frames
Cantilever supports, pipe and cable racks, equipment frames and base skids fabricated from rolled sections and plate, welded by qualified procedures and hot-dip galvanized for outdoor service.
Materials & Finishes
- Mild Steel (MS)
- Structural Steel (IS 2062)
- Hot-Dip Galvanized
- Epoxy Painted
- Primed
Fabricated Steel Supports & Frames Manufactured by Vajra
Visual specifications for fabricated steel supports & frames exported to Sharjah. We manufacture standard and custom dimensions in our Howrah works.
Cantilever & Pipe-Rack Supports
Export Grade · Vajra International
Who in Sharjah imports fabricated steel supports & frames from India
Companies and organisations active in Sharjah that specifically procure fabricated steel supports & frames from Indian manufacturers. Volumes shown are approximate annual totals across that buyer's full Indian-import mix, based on customs shipment intelligence. Vajra International is a direct ISO 9001:2015 manufacturer of fabricated steel supports & frames, talk to us instead of a trader.
Need fabricated steel supports & frames for a Sharjah project?
Vajra International rolls, fabricates and exports fabricated steel supports & frames from Kolkata, direct from manufacturer.
Etihad Rail (Sharjah segment)
Rail Infrastructure
Steel supports, earthing strips
~900 tons/yr from India
Sharjah Steel Fabricators
Fabrication
Steel supports, gratings
~750 tons/yr from India
Buyer names compiled from public customs shipment records (Seair, Volza, ImportGenius), trade press and company disclosures. Volume figures are approximate, indicative annual ranges, not contractual. Inclusion in this list does not imply a supply relationship with Vajra International. If you are one of the listed organisations and prefer not to be referenced, contact us.
Steel Supports delivery points in Sharjah
Consignments for Sharjah clear through Jebel Ali, Dubai. These are the ports, free zones and industrial districts our Sharjah consignments are consigned to — tell us which one applies and the quotation carries the right delivery terms and documentation from the start.
- Sharjah Industrial Area
- Hamriyah Free Zone
Shipped FOB, CIF, CFR against IEC 61386 and BS 4678, with mill test certificates for the grade on your order.
Sourcing steel supports into Sharjah — what buyers ask
Specification, finish, documentation and terms, answered by the works in Howrah rather than a trading desk.
Standard cantilever and pipe-rack designs typically ship in 5 to 7 weeks from drawing approval, depending on total tonnage, welding complexity and current factory load. Drawing finalization and load confirmation is usually what sets the schedule, so get structural drawings approved early to avoid delaying production.
Ask for their Welding Procedure Specification (WPS) and Procedure Qualification Record (PQR) for the joint types and material thickness used on your project, and ask which code they weld to (AWS D1.1, IS 816, or similar). A manufacturer with genuinely qualified procedures can produce this documentation immediately; a fabricator who welds without formal qualification usually can't.
Yes. Building to IS 2062 for material is standard for Indian fabricators, and referencing EN 1090, the European structural steelwork execution standard, or AWS D1.1 for welding lets one fabricator serve Indian, European and Gulf-standard projects. Confirm which standard your project's structural engineer specifies.
IS 2062 E250 is the standard general-purpose structural steel grade for most pipe racks and equipment frames; E350 (higher yield strength) is specified where higher loads or reduced section sizes are needed for the same capacity. Your structural engineer's calculation will specify the required grade; confirm it's stated on the drawing before fabrication begins.
Refinery main pipe-rack corridors are 6–15 m wide, 3–5 tiers tall, with a typical loaded weight of 1.5–3.0 t/m. Sizing is done to IS 875 (wind, seismic) and IS 800 (member checks). We work from your plot plan and pipe schedule, most EPC contractors share a sketch and we come back with a fully designed rack.
Buying steel supports for United Arab Emirates generally, not just Sharjah?
Port of entry, the standards a United Arab Emirates consultant will hold you to, Incoterms and the full delivery map.
Other categories Sharjah imports from India
Sharjah's buyers source multiple categories from Indian manufacturers. Compare with the other high-volume imports below.
Need fabricated steel supports & frames in Sharjah? Talk to a manufacturer.
Vajra International is a direct manufacturer in Kolkata, not a middleman. Tell us specification, quantity and your preferred Incoterm. You'll get a structured quotation with MTC, COO and logistics already factored in.
- MTC · COO · inspection reports
- ±0.01 mm precision · in-house QA
- FOB · CIF · CFR to all major ports