Cable Tray Accessories & Fittings
Importers in Enugu

Cantilever-arm supports suit wall-mounted horizontal runs with reasonable spacing between fixing points, common in plant and industrial buildings. Bracket and hanger supports suit runs off an overhead structure, ceiling or pipe rack, or shorter-span applications. The choice depends on the available fixing structure at your site, not the tray type, so confirm what's actually there to fix into before selecting.

A coupler, or splice, plate joins two tray sections both mechanically and electrically, maintaining continuity along the run, which matters most if the tray also serves as an equipment grounding conductor path. Internal coupler plates sit inside the tray section; external plates bolt across the outside. Specify the type matching your tray manufacturer's standard joint detail for a proper fit.

Ideally galvanized in the same batch or to the identical specification as the parent tray, so zinc thickness and coverage match exactly. A fitting galvanized to a lower spec than its tray corrodes faster and becomes the weak point in an otherwise well-specified run. Ask for a single galvanizing certificate covering both tray and accessories where possible.

Standard 2.5/3.0 m covers ship in 2 weeks. Non-standard cut-to-length or covers with site-specific hold-down patterns add 1–2 weeks for tooling. We hold project stock for ongoing EPC contracts so site rework is rare.